Product description

How to Use the Nectar Honeybee 2.0 510 Vape Battery:
1. Power On/Off
Press the power button 5 times in rapid succession to turn on/off, the LED light will flash 5 times.

2. Preheat Capabilities
Conventional vaporizers only heat oil from the bottom of the tank. Our Honeybee 2.0 510 vape battery features patented preheat technology, meaning it can help pre-heat your oil, evenly and quickly, even in cold temperatures.
Turn on the device and press the power button two times rapidly for an automated 30 seconds preheat (2.0V). Press the button once to stop. In preheat mode, the green LED lights will breathe/soft flash for 30s.

3. Variable Voltage
There are four voltage settings in the Honeybee 2.0 510 Vape Battery:

• 1) 2.8V (One Light).
• 2) 3.2V (Two Lights)
• 3) 3.6V (Three Lights)
• 4) 4.0V (Four Lights)

You can change voltage by pressing the power button 3 times rapidly. The lights on the top side of Hitter will indicate which setting you are on.

4. Charging
After plugging the charger into the Honeybee 2.0, the light will blink and show you an indication of battery level:

• One light = 25% power
• Two Lights = 50% power
• Three lights = 75% power
• Four Lights = 100% power (When it is fully charged, the 4 lights will be on).

5. Filling the Cartridge
Unscrew the mouthpiece and fill the cartridge with your preferred oil.

6. Magnetic Connector
Your device comes with a magnetic adapter. Screw the magnetic adapter to your pre-filled cartridge then drop the cartridge inside the HoneyBee. Once connected properly, all 4 LEDs will light up for one second.

Note: You may need to pre-heat your device if the liquid you’re using is thick or if you’re using your device in cold temperatures.

Safety Warning

This product contains nicotine which is a highly addictive substance, applies only when the device is used with nicotine. Keep this product out of the reach of children.