20 in stock
18 in stock
A vape atomizer is a part that makes up your vaping device
which is responsible for generating the vapour you inhale. Whether you’re using a vape tank, a rebuildable
atomizer, a 510 thread cartridge, vape cartridge or even a vape pod, the purpose of the atomizer is always the
same. Every vape atomizer should provide you with 3 things; a reservoir / container to hold your oil, juice or
e-liquid, a heating surface to vaporise the liquid and a coil to transport the liquid from the reservoir to the
Vape atomizers traditionally came in some form of tank
which contained within it a cotton wick wrapped in a coil. The cotton wick would soak up your vape juice and the
coil would heat up, in doing so the vape juice would vaporize into vapour that would be inhaled. Nowadays vape
cartridges come in all shapes and sizes, and coils are made with a variety of different materials, predominantly
cotton or ceramic.
Each type of coil has its own advantages and disadvantages
and there’s no one size fits all solution. When deciding between a cotton coil or a ceramic coil atomizer, it’s
important to remember that cotton coils tend to work best with thinner oils such as most e-liquids, whereas
ceramic coils tend to work better with thicker oils such as CBD oil. In most cases, when using an E liquid or
vape juice with an incompatible coil type (cotton, ceramic etc.), your vape oil will most likely taste burnt –
for example, using a ceramic coil vape atomizer with a standard 50/50 VG PG E liquids, or using a cotton coil
vape atomizer with a thick oil such as CBD oil.
One of the advantages of ceramic coil vape atomizers is
that they may taste burnt, however they do not actually burn out and swapping the vape juice with one that’s
compatible will fix the issue. Whereas when a cotton coil cartridge burns out, the taste will linger for longer
regardless if you replace the vape oil with one that is compatible with the atomizer and you will usually have
to swap out the cartridge or coil for a new one, so it’s important to remember to avoid using thick oils and
vape juices with cotton coil cartridges.
You can use a range of things inside a vape atomizer. You
could use anything from thick oils to e-liquids. However, it is important to note that you should always ensure
that what you are using within your vape atomizer is safe for use by vaping and inhalation, as not all oils are
intended to be vaped.
Some atomizers are more suitable for a particular liquid
than others, for example some are designed to be used specifically with thick oils only, whereas others are only
capable of using e-liquids. Luckily for you, our vape atomizers can handle it all!
Vape atomizers can usually be used with any vape battery.
It all depends on the particular atomizer that you are using, however, the most commonly used ones feature a 510
thread which makes it compatible with most vape batteries. So to sum it up, vape atomizers can pretty much be
used with any vape battery.
Yes, most vape atomizers are universal, but this really
depends on their connection type. The most popular being a 510 thread connection, hence they’re often referred
to as 510 thread cartridges. However, there are many product specific vape atomizers which will only fit onto
their given vaporizer such as most vape pod systems.
Many newer vape atomizers just like some of ours here at
Nectar come with a magnetic adapter which screws onto the 510 thread this turns the cartridge magnetic and hence
makes it easier to slot into your vape battery, thus making switching atomizers around much faster and easier.
It is important to keep hold of these magnetic adapters as they will enable you to use other 510 thread vape
atomizers with that specific device; without the magnetic adapter the atomizers won’t work with that particular
Not all vape cartridges work with CBD oil, but some do. If
the vape cartridge that you are using says that it is suitable for use with thick oils, just like our ones here
at Nectar, then you can safely use CBD oil in the vape cartridge.
Please make sure that the CBD oil that you are using in
your atomizer is intended for vaporizing as it can be very dangerous to vape oils that are not safe for
inhalation. Only use oils and liquids that have been manufactured with the purpose of being vaporized and
As previously mentioned, a general rule of thumb is that
cotton coils work best with thinner oils such as most standard vape juices, whereas ceramic coils tend to work
better with thicker oils such as CBD oil. This is because CBD oil is relatively thick and does not soak into a
cotton wick easily, so when the power button is pressed and the coil heats up, although the outside of the
cotton may seem to be soaked, the CBD oil will be too thick to work through the fibres of the cotton and you’ll
likely to be heating up a dry coil, hence the burn out and horrible taste. You can vape atomizers in our CBD vape pens.
Yes, vape atomizers are reusable. You can refill vape
cartridges to keep reusing them. However, they can only be reused so many times before they will need replacing
for optimum performance and vapour quality, which can vary between 5-7 times on a 2ml vape cartridge, or 7-10
times on a 1ml vape cartridge.
Yes, you can clean vape atomizers. Most people tend not to
clean vape atomizers though as you will end up replacing them at some point anyway so cleaning your vape
atomizer is not completely necessary.
Vape atomizers can last different lengths of time depending
on how often you use them. Usually we recommend that you replace your vape atomizer around after the 5th time
that you have refilled it as this is when the quality of the vapour tends to start decreasing.
You will be able to tell when it is time to replace your
vape atomizer when the performance of it starts to decrease and you will notice that it isn’t producing the same
quality of vapour as it once did before.
If you start to notice that you are not getting as much
flavour from your liquid of choice as you once did and that the clouds are not as thick or consistant as they
were at the beginning of your vape atomizer then it is an indication that it is perhaps time to replace the vape
No, vape atomizers when you first receive them do not
contain nicotine as they are empty. There is a warning on the packaging of the vape atomizer in case you choose
to use nicotine within the vape atomizer, however, there is not any in there to start with unless you put it in
You can get vape atomizers made of either glass or plastic,
however, we suggest that you opt for a vape atomizer that is made of glass as it has been proved that vaping
with plastics is dangerous for your health as you can inhale toxics.
Our vape atomizers here at Nectar are made of the highest
quality materials, including glass rather than plastic.
Vape atomizers are compatible with nicotine vape juices and
oils. However, we do not recommend that you use nicotine juices, nicotine e-liquids or nicotine oils in your
vape atomizer as nicotine has proved to be dangerous to your health.
The adapters that you receive with your vape atomizers make
the actual vape atomizer compatible with that specific vape battery device. The purpose of the adapters is to
make your vaping experience easier and smoother by only having to simply drop or lift the vape atomizer in or
out of the vape battery device, rather than having to screw it in with the thread.
Keep hold of your adapters as they will enable you to use
other 510 thread vape atomizers in that particular vape battery device.
It depends on how it is fitted in. If it features a 510
thread, which most vape atomizers do, then most of the time you will just have to twist the vape atomizer
anti-clockwise repeatedly to remove it from the device. Then twist the new vape atomizer clockwise to secure it
into the vape battery device.
However, many vape atomizers use an adapter to make it
easier to remove from the device, if this is the case with your vape battery device and vape atomizer then you
simply just have to pull it out to remove it, then twist the adapter anti-clockwise to remove it. Make sure that
you place the adapter onto the new device by twisting it on clockwise and then drop the vape atomizer with the
adapter fastened into your vape battery device.
All you have to do is load the vape oil or juice into the
vape atomizer, then let it sit for 5 minutes before attaching it back onto your vaporizer battery.
Next, make sure that your vape battery is fully charged and
ready to go. Next, attach your vape atomizer to the battery.
After the vape atomizer has been attached to the vape
battery, you can now switch the device on and select the temperature or voltage of your choice and allow the
liquid or oil in the vape atomizer to heat up. Once it has heated up completely, inhale and enjoy!
First of all, you will need to open up the vape atomizer.
To open up the vape atomizer, simply hold the glass body with one hand to stop it from rotating and unscrew the
You can then fill the vape atomizer with your chosen liquid
by using a tip no more than 2mm in width to ensure the vape atomizer can be filled without spillage. Pour the
liquid between the central post and the glass, it is important that you avoid filling the central post. For best
results, we recommend that you wait 5 minutes after filling to ensure the coil is completely soaked before
Once you have filled the vape atomizer, you can close it by
simply holding the glass body with one hand to stop it from rotating and screw the mouthpiece back on,
Next you may need to add on the Magnetic Adapter depending
on the device that you choose to use the vape atomizer with. The purpose of these is to remove the need to screw
and unscrew your vape atomizer each time you want to top it up, making the whole process a lot quicker. To use
the magnetic adapter which comes with the vape atomizer, simply hold the vape atomizer in one hand whilst
screwing the magnetic adapter clockwise. That is it!
Once the magnetic adapter is fitted on, simply drop the
vape atomizer inside the vape battery and then use it as you wish!
© 2023 Nectar Medical Vapes | All Rights Reserved